Eight Door / Ten Floor Controller
If needed, access the Eight io Controller documentation
PDK Eight io Overview
NOTE: By default, ethernet devices use what is known as DHCP (Dynamic Host Configuration Protocol), which automatically assigns a dynamic (temporary) IP address for a network. For Single/Eight io Ethernet connections, a static (permanent) IP address or IP reservation is suggested; a static IP address is not required for Cloud Nodes.
Static IP Address
To set up a static IP address for an Ethernet device, the third-party Lantronix DeviceInstaller application can be used. The suggested static IP address can be obtained from your IT manager or network administrator. The default dynamic IP address that is already assigned to the device by the router may also be used and converted to a static IP address.
Download the Lantronix DeviceInstaller (stand-alone version) at the Lantronix website for the necessary zip file (and DeviceInstaller Help, if necessary) to install and use this application.
NOTE: If two Cloud Nodes are in the same vicinity (even within a mile) and you are unable to detect a wireless device on the nearest Cloud Node, check the other Cloud Node in Discovery to see if it may have connected to the wrong Cloud Node.
Eight io Power Install Video